Yayınlar

  • S. C. Costa, I. Barreno, M. Tutar, J. A. Esnaola,  H. Barrutia, “The Thermal Non-Equilibrium Porous Media Modelling for CFD Study of Woven Wire Matrix of a Stirling Regenerator” Energy Conversion and Management, Vol. 89(1), pp. 473–483, 2015.
  •  I. Torrano, M. Tutar,  M. Martinez, A. Rouquier, N. Mordant, M. Bourgoin, “Comparison of Experimental and RANS-Based Numerical Studies of the Decay of Grid-Generated Turbulence” Journal of Fluids Engineering, Vol. 137(6):061203-061203-12, 2015.
  • I. Barreno, S. C. Costa, M. Cordon, M. Tutar, I. Urrutibeascoa, X. Gomez, G. Castillo, “Numerical Correlation for the Pressure Drop in Stirling Engine Heat Exchangers” International Journal of Thermal Sciences, Vol. 97, pp. 68-81, 2015.
  • .M. Tutar, I. Veci, “Experimental Wave Flume Study of Savonius-type Multiple Rotor Arrays” Journal of Renewable and Sustainable Energy, Vol. 7, 063125, 2015.
  • I. Torrano, M. Martinez M. Tutar, “LES Study of Grid-Generated Turbulent Inflow Conditionswith Moderate Number of Mesh Cells at Low Re Number” International J. Computational Fluid Dynamics, Vol. 30(2), pp. 141-154, 2016.
  • M. Tutar, I. Veci, “Experimental Study on Performance Assessment of Savonius Rotor Type Wave Energy Converter in an Experimental Wave Flume” IET Renewable Power Generation, Vol. 10,issue 4, pp: 541-550, 2016.
  • M. Tutar, I. Veci, “Performance Analysis of a Horizontal Axis 3-Bladed Savonius Type Wave Turbine in an Experimental Wave Flume (EWF)” Renewable Energy, Vol. 86, pp: 8-25, 2016.
  • L. Florea, A. Martin-Mayor, M. M. Bou-Ali, K. Meagher, D. Diamond, M. Tutar, F. Benito-Lopez, “Adaptive Coatings Based on Polyaniline for Direct 2D Observation of Diffusion Processes in Microfluidic Systems” Sensors and Actuators, B: Chemical, Vol. 231, pp. 744-751, 2016.
  • F. Erdogdu, M. Tutar, S. Oines, I. Barreno, D. Skipnes, “Determining the Optimal Shaking Rate of a Reciprocal Agitation Sterilization System for Liquid Foods using an Experimental and Computational Approach”, Food and Bioproducts Engineering, Vol. 100, pp. 512-524, 2016.
  • F. Erdogdu, M. Tutar, F. Sarghini, D. Skipnes, “Effect of Viscosity and Agitation Rate on Temperature and Flow Field in Cans during Reciprocal Agitation”, J. of Food Engineering, Vol. , pp. 1-13, 2017.
  • M. Tutar, M. Mendi, “A Performance Study of Horizontal-axis Micro-turbine in a Numerical Wave Flume”, Energy Procedia, Vol. 112, pp. 83-91, 2017.
  • O. Koysuren, H. N. Koysuren, “Characterization of poly(methyl methacrylate) nanofiber mats by electrospinning process”, Journal of Macromolecular Science, Part A, Volume: 53, Issue: 11, 688 – 695, 2016.
  • O. Koysuren, H. H. Koysuren, “Photocatalytic activities of poly(methyl methacrylate)/titanium dioxide nanofiber mat”, Journal of Macromolecular Science, Part A, Volume: 54, Issue: 2, 80 – 84, 2017.
  • I. Semerci, 2017. “The Superiority Of Gamma-Valerolactone (Gvl) As A Novel Pretreatment Agent To Enhance The Enzymatic Digestibility Of Cotton Stalks”, Journal of International Scientific Publications – Agriculture & Food, 2017.
  • E. I. Gurbuz and N. I. Haykir, “Recent Developments in Biorefinery Catalysis, Advances in Refining Catalysis”, CRC Press-Taylor & Francis Group, 2017.
  • I. Semerci, F. Güler. “Protic Ionic Liquids As Effective Agents For Pretreatment of Cotton Stalks At High Biomass Loading”. Ind Crops Prod 2018;125:588-95.
  • I. Semerci, F. Güler. “Pretreatment of Crop Wastes From Edible Biomass With A Protic Ionic Liquid”. Int J Renew Energy Res, 2019;9(1):17-23.
  • I. Semerci, F. Güler, G. Ersan, K. Soysal, O. Ozturk, H. Altinisik, S. Tirpan, F. Ozcelik. “Assessment of A Protic Ionic Liquid With Respect to Fractionation and Changes In The Structural Features of Hardwood and Softwood”. Bioresour Technol Rep, 2019;8.
  • O. Koysuren, H. N. Koysuren, “Photocatalytic activity of polyaniline/Fe-doped TiO2 composites by in situ polymerization method”, Journal of Macromolecular Science, Part A, 2019, Volume: 56, Issue: 3, 267-276.
  • O. Koysuren, H. N. Koysuren, “Solid-phase photocatalytic degradation of polyaniline under UVA and UVC light irradiation”, International Journal of Environmental Analytical Chemistry, 2019. DOI: 10.1080/03067319.2019.1678602.
  • O. Koysuren, H. N. Koysuren, “Photocatalytic Activities of Boron Doped Titanium Dioxide Nanoparticles and its Composite with Polyaniline”, Journal of Macromolecular Science, Part B, 2020, Volume: 59, Issue: 3, 182-195.
  • O. Koysuren, “Improving ultraviolet light photocatalytic activity of polyaniline/silicon carbide composites by Fe-doping”, Journal of Applied Polymer Science, 2020, Volume: 137, Issue: 14, 48524 (1-10).
  • E. Yagmur, Y. Gokce, S. Tekin, N. I. Semerci, Z. Aktas. “Characteristics And Comparison of Activated Carbons Prepared From Oleaster (Elaeagnus Angustifolia L.) Fruit Using KOH and ZnCl2”. Fuel, 2020;267.
  • S. Yaglikci, Y. Gokce, E. Yagmur, Z. Aktas. “The Performance of Sulphur Doped Activated Carbon Supercapacitors Prepared From Waste Tea”. Environmental technology, 2020;41(1), 36-48.
  • I. Semerci, G. Ersan. “Hornbeam Pretreatment With Protic Ionic Liquids: Cation, Particle Size, Biomass Loading and Recycling Effects”. Ind Crops Prod, 2021;159.
  • I. Semerci, F. Guler. “Levulinic Acid Production From Wood With Green Solvents”. Journal of Wood Chemistry and Technology, 2021; 41.
  • Y. Gokce, S. Yaglikci, E. Yagmur, A. Banford, Z. Aktas. “Adsorption Behaviour of High Performance Activated Carbon From Demineralised Low Rank Coal (Rawdon) for Methylene Blue and Phenol”. Journal of Environmental Chemical Engineering, 2021; 104819.
  • S. Yaglikci, Y. Gokce, E. Yagmur, A. Banford, Z. Aktas. “Does High Sulphur Coal Have The Potential to Produce High Performance – Low Cost Supercapacitors?”. Surfaces & Interfaces, 2021;22, 100899.

Bildiriler

  • Yaglikci, B. Salgara, F. Soysal, B. Cicek, “Investigation of gas phase composition during carbon nanotube production”, ICCE 2011, Venedik (Sözlü Sunum)
  • O. Koysuren, “Carbon Nanotubes Containing Conductive Nanofibers and Characterization as Electrode Material For Electrochemical Capacitor”, Materials Research Society MRS 2014 Fall Meeting & Exhibit, Boston, A.B.D., 30 Kasım-5 Aralık 2014.
  • S. Yaglikci, B. Cicek. “Kinetik analiz ile karbon nanotüp oluşumundan sorumlu bileşenin belirlenmesi”, 1. Ulusal Karbon Konferansı, 12-13.03.2015, İstanbul Teknik Üniversitesi, İstanbul (Poster Sunumu)
  • Ö. Köysüren, H. N. Köysüren, C. Duran, İ. Arslan, “Elektroeğirme Prosesi ile Hidrofobik Nanofiber Kaplamalar”, Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı Kapadokya (IMSTEC’16), Nevşehir, Türkiye, 6-8 Nisan 2016.
  • H. N. Köysüren, Ö. Köysüren, M. Koca, B. Çıtlak, O. Altın, “Yüzey İşleminin Karbon nanotüp/Polimer Kompozitlerin Özelliklerine Etkisi”, Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı Kapadokya (IMSTEC’16), Nevşehir, Türkiye, 6-8 Nisan 2016.
  • N. I. Haykir and U. Bölükbaşı , “Ionic liquids as effective solvents for the production of biomass derived energy and chemicals”, ECO-BIO 2016, Rotterdam, Netherlands, 2016.
  • Ö. Köysüren, H. N. Köysüren, “Immobilization of TiO2 Nanoparticles in PMMA Nanofiber Mat for Photocatalytic Removal of Dyes from Water”, Polymer Processing Society (PPS) Europe Africa Conference 2017, Dresden, Almanya, 26-28 Haziran 2017.
  • S. Yaglikci, Y. Gokce, E. Yagmur, Z. Aktas. “Effects of Demineralisation Process on the Activated Carbon Prepared from Rawdon Coal”, PPM 2017 12-15.09.2017, Kuşadası, Türkiye (Poster Sunum)
  • K. Arslan, K. Soysal, Ö. F. Murathan, “Surface Characterization of Boron Nitride Nanotubes (BNNT)”, 49th International October Conference on Mining and Metallurgy, Bor, Serbia, 18-21 Ekim 2017
  • K. Soysal, K. Arslan, Ö. F. Murathan, “Obtaining of Boron Nitride by CVD Method at Low Temperatures”, 8th  International Advanced Techologies Symposiım, Elazığ, Turkey, 19-22 Ekim 2017